Top Types of Carpet Cleaning Methods Used by Companies

Before you decide on the type of cleaning method you need for your carpets, you should know what these methods are and how they work. These methods include Chem-Dry, Steam cleaning, and encapsulation. Listed below are the top types of carpet cleaning methods. Whether you have a striped carpet, cut pile carpet, or a commercial installation, you should consider which method is best for your particular situation.

Bonnet cleaning

One of the top carpet cleaning bairnsdale methods is bonnet cleaning, which involves a chemical detergent being applied to the surface of a carpet. A rotary cleaning machine, fitted with an absorbent pad, brushes the cleaning solution through the carpet pile. The machine also vacuums the carpet, removing dirt and moisture. The bonnet cleaning process is usually used on commercial carpets. Bonnet cleaning can be a fast and effective way to get a clean carpet without the use of a wet cleaning agent.

Merit Carpet Cleaning

Compared to steam cleaning, bonnet cleaning is a quick and cost-effective method. This method does not require a high-pressure steam cleaning, so it is an ideal option for routine maintenance and light cleaning. However, it is not suitable for all types of carpets, as it may damage the fibers or pile, leaving it drier than it would have been without it.


When choosing a company to clean your carpet, choose one that uses a safe, green method such as Chem-Dry. This method uses one-fifth of the water used in steam cleaning, which means your carpet will dry within hours. You can also avoid the risk of mold, which is one reason some people choose bare floors. And with Chem-Dry, there are no hidden fees.

A Chem-Dry cleaning method uses 80% less water than traditional steam cleaning. The process involves creating millions of microscopic bubbles that lift dirt from the carpet’s fibers. Low-pressure cleaning methods like Chem-Dry are better for your carpet’s fibers and the environment. It allows your carpet to dry in as little as one to two hours.

Steam cleaning

Steam cleaning involves the use of hot water at a high temperature to remove stains and deep-down dirt. The high-pressure steam also acts as a disinfectant, removing allergens and dead skin cells from carpet fibers. The steam cleaner also extracts most of the water, leaving the carpet dry. This method is recommended for heavily soiled carpets and deep-down stains.

Unlike shampooing, steam cleaning removes odors by dissolving dirt by allowing oxygenated bubbles to penetrate into the fibers. The oxygenated bubbles lift the dirt deep into the carpet fibers, allowing the steam to clean more effectively. The steam also removes detergents, leaving the carpet clean and fresh. While steam cleaning is the most popular method for professional carpet cleaners, it is still recommended to use fresh water for each application.

Another important aspect of steam cleaning is drying time. While it takes approximately an hour to dry a home’s carpet, it can take more than twice as long to dry a commercial job. To avoid this, companies perform commercial cleaning jobs later in the day, allowing them to thoroughly dry the carpet overnight. However, some people may not like the idea of a damp carpet. In this case, a company can use another method of cleaning. Another method that can be used to prevent over-wetting is dry carpet cleaning, which uses a dry carpet cleaning powder.


Companies that clean hotels, restaurants, and other commercial properties often choose encapsulation as their preferred method, because it’s the least expensive and most effective way to remove soil from their carpets. The high-quality polymers encapsulate soil and keep them from building up on the surface, improving carpet appearance and preventing sticky residue from forming. This method is ideal for interim cleans, but it should always be followed by hot water extraction.

The process of encapsulation begins by vacuuming the carpet to remove the top 80 percent of dust and debris. Deeply embedded particles cannot be encapsulated by crystals. Next, the solution is applied to a scrubber that works its way into the carpet at a steady speed. This solution should only be applied to a carpet once, as overwetting can cause the solution to run out too quickly.

Leave a Reply

Your email address will not be published. Required fields are marked *